Traditional Roofing Materials: Clay tile
Clay tiles are one of the most distinctive and decorative historic roofing materials because of their great variety of shapes, colors, profiles, patterns, and textures. Traditionally, clay tiles were formed by hand, and later by machine extrusion of natural clay, textured or glazed with color, and fired in high-temperature kilns. The unique visual qualities of a clay tile roof often make it a prominent feature in defining the overall character of a historic building. The significance and inherently fragile nature of historic tile roofs dictate that special care and precaution be taken to preserve and repair them.
 Clay tile was a popular roofing material for residential structures during the Romanesque Revival period. Photo: NPS files. |
Clay tile has one of the longest life expectancies among historic roofing materials-generally about 100 years, and often several hundred. Yet, a regularly scheduled maintenance program is necessary to prolong the life of any roofing system. A complete internal and external inspection of the roof structure and the roof covering is recommended to determine condition, potential causes of failure, or source of leaks, and will help in developing a program for the preservation and repair of the tile roof. Before initiating any repair work on historic clay tile roofs, it is important to identify those qualities important in contributing to the historic significance and character of the building.
This Brief will review the history of clay roofing tiles and will include a description of the many types and shapes of historic tiles, as well as their different methods of attachment. It will conclude with general guidance for the historic property owner or building manager on how to plan and carry out a project involving the repair and selected replacement of historic clay roofing tiles.
Repair of historic clay tile roofs is not a job for amateurs; it should be undertaken only by professional roofers experienced in working with clay tile roofs.
Historical Background
The origin of clay roofing tile can be traced independently to two different parts of the world: China, during the Neolithic Age, beginning around 10,000 B.C.; and the Middle East, a short time later. From these regions, the use of clay tile spread throughout Asia and Europe. Not only the ancient Egyptians and Babylonians, but also the Greeks and Romans roofed their buildings with clay tiles, and adaptations of their practice continue in Europe to the present. European settlers brought this roofing tradition to America where it was established in many places by the 17th century.
 Tapered barrel clay roof tiles were custom made for the restoration of the 1820s Indian barracks at Mission Santa Cruz in California. Photo: NPS files. |
Archeologists have recovered specimens of clay roofing tiles from the 1585 settlement of Roanoke Island in North Carolina. Clay tile was also used in the early English settlements in Jamestown, Virginia, and nearby St. Mary's in Maryland. Clay roofing tiles were also used in the Spanish settlement of St. Augustine in Florida, and by both the French and Spanish in New Orleans.
Dutch settlers on the east coast first imported clay tiles from Holland. By 1650, they had established their own full-scale production of clay tiles in the upper Hudson River Valley, shipping tiles south to New Amsterdam. Several tile manufacturing operations were in business around the time of the American Revolution, offering both colored and glazed tile and unglazed natural terra-cotta tile in the New York City area, and in neighboring New Jersey. A 1774 New York newspaper advertised the availability of locally produced, glazed and unglazed pantiles for sale that were guaranteed to "stand any weather." On the west coast clay tile was first manufactured in wooden molds in 1780 at Mission San Antonio de Padua in California by Indian neophytes under the direction of Spanish missionaries.
By far the most significant factor in popularizing clay roofing tiles during the Colonial period in America was the concern with fire. Devastating fires in London, 1666, and Boston in 1679, prompted the establishment of building and fire codes in New York and Boston. These fire codes, which remained in effect for almost two centuries, encouraged the use of tile for roofs, especially in urban areas, because of its fireproof qualities. Clay roofing tile was also preferred because of its durability, ease of maintenance, and lack of thermal conductivity.
Although more efficient production methods had lowered the cost of clay tile, its use began to decline in much of the northeastern United States during the second quarter of the 19th century. In most areas outside city-designated fire districts, wood shingles were used widely; they were more affordable and much lighter, and required less heavy and less expensive roof framing. In addition, new fire-resistant materials were becoming available that could be used for roofing, including slate, and metals such as copper, iron, tin-plate, zinc, and galvanized iron. Many of the metal roofing materials could be installed at a fraction of the cost and weight of clay tile. Even the appearance of clay tile was no longer fashionable, and by the 1830s clay roofing tiles had slipped temporarily out of popularity in many parts of the country.
Revival Styles Renew Interest in Clay Roofing Tiles
By the mid-19th century, the introduction of the Italianate Villa style of architecture in the United States prompted a new interest in clay tiles for roofing. This had the effect of revitalizing the clay tile manufacturing industry, and by the 1870s, new factories were in business, including large operations in Akron, Ohio, and Baltimore, Maryland.
 The clay tile roof is important in defining the character of the c. 1917 Mission-style Grove Park Inn, Asheville, North Carolina. Photo: NPS files. |
Clay tiles were promoted by the Centennial Exhibition in Philadelphia in 1876, which featured several prominent buildings with tile roofs, including a pavilion for the state of New Jersey roofed with clay tiles of local manufacture. Tile-making machines were first patented in the 1870s, and although much roofing tile continued to be made by hand, by the 1880s more and more factories were beginning to use machines. The development of the Romanesque Revival style of architecture in the 1890s further strengthened the role of clay roofing tiles as an American building material.
Alternative substitutes for clay tiles were also needed to meet this new demand. By about 1855, sheet metal roofs designed to replicate the patterns of clay tile were being produced. Usually painted a natural terra cotta color to emulate real clay tile, these sheet metal roofs became popular because they were cheaper and lighter, and easier to install than clay tile roofs.
 Clay tiles emphasize the prominence of the peaked roofs of these late 19th century rowhouses. Photo: NPS files. |
Clay roofing tiles fell out of fashion again for a short time at the end of the 19th century, but once more gained acceptance in the 20th century, due primarily to the popularity of the Romantic Revival architectural styles, including Mission, Spanish, Mediterranean, Georgian and Renaissance Revival in which clay tile roofs featured prominently. With the availability of machines capable of extruding clay in a variety of forms in large quantities, clay tiles became more readily available across the nation. More regional manufacturing plants were established in areas with large natural deposits of clay, including Alfred, New York; New Lexington, Ohio; Lincoln, California; and Atlanta, Georgia; as well as Indiana, Illinois and Kansas.
The popularity of clay tile roofing, and look-alike substitute roofing materials, continues in the 20th century, especially in areas of the South and West-most notably Florida and California--where Mediterranean and Spanish--influenced styles of architecture still predominate.
Early Tiles
During the 17th and 18th centuries the most common type of clay roofing tiles used in America were flat and rectangular. They measured approximately 10" x 6" x ½" (25cm x 15cm x 1.25cm), and had two nail or peg holes at one end through which they were anchored to the roofing laths. Sometimes a strip of mortar was placed between the overlapping rows of tile to prevent the tiles from lifting in high winds. In addition to flat tiles, interlocking S-shaped pantiles were also used in the 18th century. These were formed by molding clay over tapered sections of logs, and were generally quite large. Alternately termed pan, crooked, or Flemish tiles, and measuring approximately 14 ½" x 9 ½" (37cm x 24cm), these interlocking tiles were hung on roofing lath by means of a ridge or lug located on the upper part of the underside of each tile. Both plain (flat) tile and pantile (S-shaped or curved) roofs were capped at the ridge with semicircular ridge tiles. Clay roofing tiles on buildings in mid-18th century Moravian settlements in Pennsylvania closely resembled those used in Germany at the time. These tiles were about 14"-15" long x 6"-7" wide (36cm-38cm x 15cm-18cm) with a curved butt, and with vertical grooves to help drainage. They were also designed with a lug or nib on the back so that the tiles could hang on lath without nails or pegs.
The accurate dating of early roofing tiles is difficult and often impossible. Fragments of tile found at archeological sites may indicate the existence of clay tile roofs, but the same type of tile was also sometimes used for other purposes such as paving, and in bake ovens. To further complicate dating, since clay tile frequently outlasted many of the earliest, less permanent structures, it was often reused on later buildings.
Preservation and Repair
Identifying Common Problems and Failures
While clay roofing tiles themselves are most likely to deteriorate because of frost damage, a clay tile roof system most commonly fails due to the breakdown of the fastening system. As the wooden pegs that fastened the early tiles to hand-riven battens rotted, they were often replaced with iron nails which are themselves easily corroded by tannic acid from oak battens or sheathing. The deterioration of metal flashing, valleys, and gutters can also lead to the failure of a clay tile roof.
Another area of potential failure of a historic clay tile roof is the support system. Clay tiles are heavy and it is important that the roof structure be sound. If gutters and downspouts are allowed to fill with debris, water can back up and seep under roofing tiles, causing the eventual deterioration of roofing battens, the sheathing and fastening system, or even the roof's structural members. During freezing weather, ice can build up under tiles and cause breakage during the freeze/thaw cycle. Thus, as with any type of roof, water and improperly maintained rainwater removal and drainage systems are also chief causes for the failure of historic clay tile roofs.
Clay tiles may be either handcrafted or machine-made; in general, roofs installed before the end of the 19th century consist of hand formed tiles, with machine-made tiles becoming more dominant as technology improved during the 20th century. Clay tile itself, whether made by hand or made by machine, can vary in quality from tile to tile. Efflorescence of soluble salts on the surface may indicate that a tile has excessive porosity which results from under-burning during its manufacture. Poor quality porous tiles are particularly susceptible to breaking and exterior surface spalling during freeze-thaw cycles. By letting in moisture, porous tiles can permit the roof battens and roof structure to rot. The problem may be compounded by waterproof building paper or building felt laid underneath which can, in some instances, prevent adequate ventilation.
Clay roofing tiles can also be damaged by roofers walking carelessly on an unprotected roof while making repairs, or by overhanging tree branches, falling tree limbs, or heavy hail. Broken tiles may no longer provide a continuous waterproof surface, thereby allowing water to penetrate the roofing structure, and may eventually result in its deterioration if the broken tiles are not replaced in a timely manner.
Although modern, machine-made clay tiles are more uniform in appearance than their handmade counterparts, they also have the potential for failure. Occasionally, entire batches of mass-produced tile can be defective.
Regular Inspection and Maintenance
 A special system consisting of brass or copper wires is used to attach these tapered barrel roof tiles. Photo: NPS files. |
Broken or missing tiles, or leaks on the interior of the building, are obvious clues that a historic clay tile roof needs repair. Even though it may be clear that the roof is leaking, finding the source of the leak may not be so easy. It may require thorough investigation in the attic, as well as going up on the roof and removing tiles selectively in the approximate area of the roof leak. The source of the leak may not actually be located where it appears to be. Water may come in one place and travel along a roofing member some distance from the actual leak before revealing itself by a water stain, plaster damage, or rotted wooden structural members.
Temporary Protection during Repair
In some instances temporary protection and stabilization may be necessary to prevent further damage or deterioration of a historic clay tile roof. Plywood sheets, plastic, roll roofing, or roofing felt can provide short-term protection until repair or replacement materials can be purchased. Another option may be to erect a temporary scaffold that is encased or covered with clear or semitransparent polyethylene sheeting over the entire roof. This will not only protect the exposed roofing members during repair or until repairs can be made, but also lets in enough natural light to enable the reroofing work to take place while sheltering workmen from cold or wet weather.
General Repair Guidance
Once the source and cause of a leak has been identified, appropriate repairs must be made to structural roofing members, wood sheathing, felt or roofing paper if it is part of the roofing membrane, or possibly to vertical roof battens to which the tiles may be attached. If the problem appears limited to gutters and flashing in disrepair, repair or replacement will probably require temporary removal of some of the adjacent tiles to gain access to them. If the roofing tiles are extremely fragile and cannot be walked on even with adequate protection (see below), it may also be necessary to remove several rows or a larger area of tiles and store them for later reinstallation in order to create a "path" to reach the area of repair without damaging existing tiles. Even if most of the tiles themselves appear to be intact but no longer securely attached to the roof substrate due to deterioration of the fastening system or roofing members, all the tiles should be labeled and removed for storage. Regardless of whether the repair project involves removal of only a few damaged tiles, or if all the tiles must be removed and relaid, historic clay roofing tiles are inherently fragile and should be pulled up carefully with the use of a slate ripper. The tiles can be reattached one-by-one with new corrosion-resistant copper nails, copper straps or tabs, "tingles', or another means after the necessary repairs have been made to the roof.
Replacing Individual Tiles
The most difficult aspect of replacing a single broken clay roof tile is doing so without breaking neighboring tiles. While flat shingle tiles can generally be walked on by a careful roofer without likelihood of much damage, high profile pantiles are very fragile and easily broken. By using sheets of plywood, planks, or burlap bags filled with sand to distribute weight, the professional roofer can move about the roof to fix broken tiles or flashing without causing additional damage. Another method involves hooking a ladder on the ridge to support and evenly distribute the weight of the roofer.
A broken tile should be carefully removed with a slate ripper or hacksaw blade inserted under the tile to cut the nail or nails holding it in place. If successive layers of tile are already in place covering the nailholes, it will not be possible to attach the replacement tile with nails through the holes, so an alternative method of attachment will be necessary. By nailing a tab of double thickness copper stripping on the sheathing below the tile, the new replacement tile can be slipped into position and secured in place by bending the copper strip up with a double thickness of the copper over the tile. A slate hook or "tingle" can be used in the same way. This fastening system functions in place of nails.
When replacing hard-to-match historic tile, and if matching clay tile cannot be obtained, it may be possible to relocate some of the original tiles to the more prominent locations on the roof where the tile is damaged, and insert the new replacement tile in secondary or rear locations, or other areas where it will not show, such as behind chimney stacks, parapets, and dormer windows. Even though replacement tile may initially match the original historic tile when first installed, it is likely to weather or age to a somewhat different color or hue which will become more obvious with time. Thus, care should be taken to insert new replacement tile in as inconspicuous a location as possible. New, machine-made clay tile or concrete tiles should generally not be used to patch roofs of old, handmade tile because of obvious differences in appearance.
Sources for Replacement Tiles
When restoring or repairing a clay tile roof it is always recommended that as many of the original tiles be retained and reused as possible. Sometimes, particularly when working with "pan and cover" type tile roofs, while many of the "cover" tiles may be broken and require replacement, it may be possible to reuse all or most of the "pan" tiles which are less susceptible to damage than the "cover" tiles. But, in most cases, unless matching replacements can be obtained, if more than about 30 per cent of the roofing tiles are lost, broken, or irreparably damaged, it may be necessary to replace all of the historic tiles with new matching tiles. When counting the number or percentage of missing or broken tiles that need to be replaced, it is important to order extra tiles to allow for breakage and damage during shipping and on the job site. The size of the tiles must be noted, whether they are all the same size, the same size but laid with different amounts of exposure to compensate for changes in perspective, or of graduated sizes according to horizontal rows-typical, for example, on conical or tower roofs.
Many late-19th and early-20th century tiles are marked on the back with the name of the company that made them, along with the size and the name of that particular tile shape. Some companies that were in business in the United States at the turn of the century are still producing many of the traditional tile shapes, and may be able to supply the necessary replacements. But it is important to be aware that in some cases, although the name of a particular tile pattern may have remained the same, the actual shape, size, thickness and profile may have changed slightly so that the new tile does not match the historic tile closely enough to permit it to serve as a compatible replacement for missing or broken tiles. While such tiles may be acceptable to use on a secondary or less prominent elevation, or to use when an entire tile roof needs replacement, they would not be suitable to use on an area of the roof that is highly visible.
Even if the particular tile is no longer manufactured by a company, the original molds may still exist which can be used to make new tiles to match the historic tiles if the quantity needed is sufficiently large to warrant a custom order. Other companies stock and sell salvaged tile, and keep a variety of old tiles available which can be identified and matched by the number and company imprint on the back of the tiles. Still other companies specialize entirely in custom-made reproduction of historic clay tiles for a specific preservation project.
Modern clay tiles are even more varied than historic tiles. Many shapes and styles are offered in a wide variety of colors and glazes. Several manufacturers produce special color-blended tiles, as well as tiles of different hues that are intended to be carefully mixed when installed. Yet, it is important to remember that many of these modern tiles may not be appropriate for use on historic clay tile roofs. The place of manufacture must also be taken into consideration. For instance, tiles made for use in a hot, dry climate may not be able to withstand wet weather, drastic temperature changes or freeze-thaw cycles. Some of the tile shapes, and many of the colors-especially those that are very bright and highly glazed-are completely contemporary in design, and do not represent traditional American styles, and thus, are not suitable for use on historic buildings.
Repairing a Failed Fastening System
Clay roofing tiles, as noted before, frequently outlast their fastening systems. Wood pegs rot, nails rust, and even copper nails that are not adequately driven in can pull out of the roof's structural members. Although it is unusual that all of the clay tiles on a roof need to be replaced unless matching replacements cannot be obtained, it is not uncommon for old tile roofs to be stripped of all their tiles in order to relay the tiles with new fastenings and battens. When the fastening system has failed, all the roof tiles must be removed and reattached with new corrosion-resistant fasteners. If possible, all the tiles should be numbered and a diagram should be drawn showing the location of each tile to aid in replicating the original pattern and color variations when the tiles are relaid. Ideally, each tile should be numbered to ensure that it is reinstalled in its original location. But this may not always be feasible or practical, and it may be enough simply to group the tiles as they are removed by type and size or function-such as field tiles, custom tiles for hips, dormers and ridges, and specially cut pieces. This will help facilitate reinstallation of the tiles. If all of the tiles have to be removed, it is probably a good idea to consider installing a layer of modern roofing felt over the wood sheathing. This will add another layer of waterproofing, while providing temporary protection during reroofing.
Even if the tiles were originally attached with wooden pegs, it is generally recommended that they be rehung with corrosion-resistant, preferably heavy copper, or aluminum alloy nails or hooks. Today there are numerous nontraditional fastening systems for clay tile roofs, and many of them are patented. Roofing contractors and architects may have individual preferences, and some systems may be better suited than others to fit a particular roof shape or to meet a specific climatic or seismic requirement. Original battens or other roof members that may have deteriorated should be replaced to match the original using pressure-treated wood. Additional support may be necessary, particularly if the original roof was inadequate or poorly designed.
Replacing Flashing
Deteriorated flashing, gutters and downspouts should generally be replaced in kind to match the historic material. Copper or lead-coated copper, if appropriate to the building, or terne-coated stainless steel, is often preferred for use on historic clay tile roofs because of their durability and long lasting qualities. However, copper staining from downspouts can sometimes be a problem on light-colored masonry walls which should be taken into consideration when planning replacements to rainwater removal systems. Clay tile roofs usually have an open valley system where the tiles are separated by metal flashing at intersections of roof sections with different angles. This makes the insertion of new flashing quite easy, as only a few surrounding tiles must be removed in the process. New copper flashing that is too "bright" can be made to blend in and "mellowed" by brush-coating it with boiled linseed oil or proprietary solutions.
Inappropriate Repairs
The most important repair to avoid is replacing broken or missing roof tiles on a historic building with materials other than matching natural clay tiles. Concrete, metal or plastic tiles are generally not appropriate substitutes for clay roofing tiles. They lack the natural color variations of clay tile, and they do not have the same texture, shape, thickness or surface irregularities.
Although much concrete tile and composition tile is produced to resemble the general shape, if not the exact profile, of clay roofing tiles, concrete tile is generally too thick and also lacks the range of colors inherent in natural clay tile. Concrete tile is not a compatible substitute material to repair or replace individual historic clay tiles.
Patching a historic clay tile roof with roofing tar, caulk, asphalt, pieces of metal, or non-matching clay tiles is also inappropriate. Such treatments are visually incompatible. They also have the potential for causing physical damage. Water can collect behind these patches, thus accelerating deterioration of roof sheathing and fastening systems, and during the expansion and contraction of a freeze-thaw cycle ice buildup at patches can break surrounding tiles.
Source: TPS #30 This article has been prepared pursuant to the National Historic Preservation Act of 1966, as amended, which directs the Secretary of the Interior to develop and make available information concerning historic properties. Technical Preservation Services (TPS), Heritage Preservation Services Division, National Park Service prepares standards, guidelines, and other educational materials on responsible historic preservation treatments for a broad public.